Intelligent on-line wireless energy saver


On-line energy saver system is a hotel solution which provides you a complete management platform for rooms. It allows to have in real time all the information regarding to room events, communicating via wireless with Hubs connected to the hotel network and to the reception software.
Both intelligent and On-line wireless models can operate with RFID 13,56 MHz ISO 14443A mifare® proximity and with magnetic stripe cards.

On-line wireless model transmits inmediately to reception all the events generated in the energy savers :

  • Time and date when the card is inserted.
  • Time and date when the card is taken out.
  • Identification of the staff cards.
  • Identification of the guest cards.

Possibility to cut off the air conditioning or heater if the guest opens the window or the door (it requires window / door sensor).

The air conditioning or heater will cut off, every time the guest leaves the room, although the guest has left the card inserted into the energy saver (it requires motion sensor).

Monitoring the status of sensors and the room temperature in the reception´s software

Motion sensor

The MOTION SENSOR is a passive infrared detector device that detects people movement in the room.
It has a wireless communication with the energy saver and it sends any movement report related to the room and also the temperature of the room to the central system in reception. Once the movement is not detected, the energy saver disconnects the air conditioning or heater that is connected to the second relay.

Door/window sensor

The WINDOW/DOOR SENSOR is a device that allows to save more energy.
When the window or the door is open, the magnet is separated from the detector and it will reported to the energy saver. After that, the energy saver disconnects automatically the air conditioning or heater that is connected to the second relay.

Specifications
  • Supply: Between 100 and 220 Vca. 10% of tolerance
  • Consumption: Nominal of 10 mA. Maximum of 20 mA
  • Frecuency: 50 - 60 Hz.
  • Projecting relays: 2 relays. One of them depending on the network phase tension and the other one voltage free.
     - Cutting power: .12A, 250V ~, cos. =1.8A, 250V ~, cos. =0.6
     - Incandescence max. charge 10A. . Halogen max. charge 10A. In case of higher  charge or inductive charge, cold light, halogen or electronic fluorescent lamps, it is recommended to install also a “contactor” (not supplied).
  • Dimensions: high 96,42mm, width 81,12 mm, bottom 32 mm.
  • Box: anticaloric ABS material.